📝 Product Overview

The LAPP 1119212 Control Cable, 1.0 mm², 12G1.0 mm² is a flexible industrial power and control cable designed for electrical interconnections, control circuits, and compatible automation applications. Part of the LAPP ÖLFLEX® CLASSIC 110 product series, this LAPP 1119212 Control Cable features multiple copper conductors, PVC core insulation, and a grey PVC outer sheath. It is designed to support reliable electrical connections in suitable industrial installations.

With a nominal conductor cross-sectional area of 1.0 mm² and a 12G1.0 configuration, the cable contains 12 cores, including a protective earth conductor. This corresponds to the requested 11+E configuration, meaning 11 conductors plus one protective earth conductor. The multicore construction helps organize control wiring and reduces the need to route multiple separate cables between compatible electrical devices and control panels.

The LAPP 1119212 Control Cable uses fine-stranded bare copper conductors with PVC insulation and a grey PVC outer sheath. Its flexible construction makes it suitable for fixed installations and applications involving occasional movement without continuous tensile loading, provided the manufacturer’s installation and bending requirements are followed. The cable is intended for suitable dry and damp environments subject to moderate mechanical stress.

The ÖLFLEX® CLASSIC 110 series is widely used in industrial electrical installations where organized conductor identification, dependable insulation, and practical installation characteristics are important. The numbered cores support easier identification during installation, commissioning, maintenance, and troubleshooting. This LAPP 1119212 Control Cable can be particularly useful in machinery, control cabinets, and automated production systems with multiple electrical connections.

The LAPP 1119212 Control Cable has a nominal voltage rating of 300/500 V and a nominal outside diameter of approximately 10.5 mm. Its oil-resistant construction and flame-retardant performance according to IEC 60332-1-2 support its use in compatible industrial environments. The LAPP 1119212 Control Cable is also associated with VDE registration for applicable configurations. Actual operating conditions and required approvals should be checked against the official technical documentation before installation.

For industrial procurement teams, electrical contractors, maintenance engineers, and automation integrators, the correct article number is essential when sourcing cable for new installations or replacement requirements. LAPP Part No. 1119212 provides a specific reference for quotations, supplier inquiries, and stock verification.

This listing is prepared for the requested LAPP China cable supply. However, the actual country of manufacture should be confirmed through the supplier’s documentation, product label, or certificate of origin. Buyers should also verify the required cable length, conductor configuration, applicable standards, and environmental conditions before ordering.

At Rewaltech Engineering, this LAPP 1119212 Control Cable can be listed for customers seeking industrial control cables and electrical components for compatible machinery and automation systems. Its multicore design, flexible copper conductors, and protective PVC construction make it a practical option for suitable industrial wiring requirements.

LAPP 1119212 Control Cable _ Key Specifications

📦 What’s Included

• LAPP 1119212 Control Cable

• Part Number: 1119212

• Conductor Cross-Section: 1.0 mm²

• Configuration: 12G1.0 mm² (11+E)

• Grey PVC outer sheath

• Supply length: As specified in the quotation or purchase order

• Manufacturer documentation: Subject to supplier availability

Price Note: The price of LAPP 1119212 Control Cable per meter may fluctuate depending on supplier availability, order quantity, exchange rates, and shipping costs. Contact Rewaltech Engineering for the latest quotation.